HomeAbout Hernon ManufacturingContact Hernon ManufacturingHernon ProductsData SheetsHernon News ReleasesHernon Newsletter 

Autobonder 2040

Features
  • Precise dispensing of two-component adhesives
  • Uses a combination of positive displacement and timed valve for maximum accuracy and consistency
  • Digital timer offers time ranges from 0.01 seconds to 9999 hours with foot switch control
  • Disposable dispense tip ensures no maintenance under normal operating conditions.
  • Unique valve design that does not allow adhesive to flow during air or power failures
Autobonder 2040 click for a larger image


Hernon has a low-cost, high-volume solution for dispensing two-component adhesives-Autobonder™ 2040. Using our time-tested PLC control system, unique pinch valve, and positive displacement, the Autobonder™ 2040 achieves very consistent and accurate amounts of dispensed material with every shot. The solid-state timer is capable of time ranges from .01 second to 9999 hours with .03% repeat accuracy.

The Autobonder™ 2040's unique valve and disposable static-mixer provide maintenance-free dispensing not available with meter-mix systems. The Autobonder™ 2040's valve will stop dispensing material during power or air outages for increased operator safety.

The Autobonder™ 2040 increases productivity with hands-free operation via a foot-pedal, and ensures a consistent 1-to-1 mix of adhesive on every part.

Specifications

Electrical

120 VAC

Air Pressure (MAX)

100 PSI Fully Adjustable

Dimensions

Control Box

10" Wide
7.5" Deep
3.75" High

Dispenser

10" Wide
20" Deep
36.5" High

Weight

31.2 Pounds (14.2 Kg)

Foot Pedal

Fully grounded momentary contact
Power Cord Molded 3-prong plug, 6ft. length
Timer Range 0001 to 9999 Adjustable to Hr, Min, Sec
Capacity 400 ml Dual Cartridge

Click for Proper Dispensing Method
 home about contact products datasheets news newsletter

Hernon Manufacturing, Inc.
High Performance Adhesives and Sealants
Sanford, FL USA
800-527-0004 or 407-322-4000
FAX 407-321-9700
info@hernonmfg.com