|
1 |
END BELL FASTENERS
Secure Fasteners with Nuts N' Bolts 423 or 425.
Refit damaged threads in end bells and housings with Metal Cement
850. |
|
2 |
SHAFT KEYS AND KEYWAYS
Mount & secure new keys with Cylinlock 846 or 822.
Repair "wallowed-out" shafts with Metal Cement 850. |
|
3 |
BEARINGS AND BUSHINGS
Mount & secure new bearings, bushings, sleeves and fan disks
with Cylinlock 846 or 822.
Repair damaged shafts and end bells with Metal Cement 850. |
|
4 |
END BELL FLANGES
Gasket & seal end bell flange faces with non-corrosive
Silastomer 343.
Seal precision flanges or dress new precut gaskets with Gasket
Replacer 910 to maximize seal integrity. |
|
5 |
IDENTIFICATION PLATES
Bond I.D. Plates to housings with ReAct 727 (300°F), ReAct
761 (400°F), `or Quantum 138. |
|
6 |
WIRE VARNISH
Strip wire varnish prior to rewinding coils / armature with Gasket
Remover 30. |
|
7 |
COMMUTATORS
Bond commutators to shafts with ReAct 727 (300°F), ReAct
761 (400°F), Cylinlock 846 or Cylinlock 822. |
|
8 |
BRUSH HOLDERS
Bond brush holders into housings with ReAct 727 (300°F),
ReAct 761 (400°F), Cylinlock 846 or Cylinlock 822. |
|
9 |
LAMINATIONS
Repair separated laminations with Cylinlock 846 or Cylinlock
822. |
|
10 |
CONDUIT CONNECTION BOX
Seal junctions with non-corrosive Silastomer 343.
Secure fasteners and connectors with Nuts N' Bolts 420 or 423. |
|
11 |
MAGNETS (FERRITES)
Bond magnets to housing / shaft with ReAct 727 (300°F) or
ReAct 761 (400°F). |