COMMERCIAL ITEM DESCRIPTION: A-A 3097

SILASTOMERS 333, 334, 336:

When fully cured and washed, Silastomers 333, 334 and 336 meet the requirements of FDA Regulation No. 21 CFR 177.2600 (formerly 121.2562) subject to and use compliance with any applicable total extractives limitations.

Hernon 317, Two-Part Epoxy:

Cured coating formulated with Hernon 317 epoxy resins, crosslinking agents and adjuncts may be safely used as food-contact surfaces and conform to listing in section 175.300, Title 21 (21 CFR 175.300) of the Code of Federal Regulations. The cured Hernon 317 epoxy coating may be applied over a metal or other suitable substrate as a continuous film that serves as a functional barrier between food and the substrate. Please review the regulations.

Dripstops 920, 940; Nuts N' Bolts 427; Self Seelers 604, 615, 616, 618:

Grade numbers 920, 940, 427, 604, 615, 616 and 618 have been tested and classified by Underwriters Laboratories Inc. as to fire hazard only: Fire hazard is small; No flash point in liquid state; Ignition temperature 837°F (447°C). Suitable for use in devices handling gasoline, petroleum oils, natural gas (pressures not to exceed 300 psig), propane, and butane. 29R9 Reference: Underwriters laboratory File Number MH14222.