November 2006 - Volume 17

All new Hernon R125 Dispenser Reservoir

The Hernon R125 Pressure Reservoir a versatile and durable pressure reservoir specifically designed for today's production environment. The pressure reservoir is a critical component of any fluid dispensing system; therefore, the R125 Pressure Reservoir meets the needs of system designers and users.

The material output line is located in the center of the lid. This allows the dip tube to be centrally located so that an up to 1-gallon container can be directly placed into the reservoir. The lid design and single knob secure system permit quick changes or refills by operators and minimal clean up.

The durable polyethylene material feed tube is resistant to most chemicals including adhesives, solvents, lubricants, and sealants. The polyethylene feed tube is disposable and can be easily replaced.

The airtight lid seal and meticulous construction of the reservoir body ensure there are no leak points for air or material. The material will only be in contact with the container and feed line. This allows for safe dispensing of a wide-variety of adhesives and sealants.

All of Hernon's employees would like to wish you and your family a happy holidays season. We want to thank all of our customers for another year of continued robust growth.

In observance of some holidays, Hernon Manufacturing will be closed on the following days.

Hernon's emergency technical line will be active, though. You can reach it by calling 407-322-4000 (800-527-0004 toll-free) and choosing option 4 while our offices are closed.

A maintenance person's worst nightmare, a wallowed keyway in a shaft and spline assembly or spun bearings on a critical piece of equipment and the nearest replacement parts 3-days away! Not if they have Hernon® Metal Cement™ 850 in their toolbox. Based on the proven chemistry of Hernon Cylinlock™, Metal Cement™ 850 is a single component, silver color paste designed to quickly repair worn machinery parts. Once confined between parts, it develops a high strength bond with excellent chemical and temperature resistance. An assembly bonded with Metal Cement™ is often double the strength of press fitted parts. Metal Cement™ is suggested for new assemblies as well, increasing reliability and to prevent future breakdowns.

To use Metal Cement™ 850:

1. Be sure each mating surface is relatively free of oils and greases
2. Apply Metal Cement™ 850 to the component that will not be moved
3. Slide or press the opposite component into place

Note: EF™ Primer 50 will reduce fixture time to minutes but may reduce ultimate strength. Temperatures below 50°F and gaps over 0.10" diameter slow cure; utilize EF™ Primer 50 to restore speed, if necessary. Bond Line temperature of 250°F for 30 minutes will fully cure Metal Cement™ 850.

More Information

Hernon Customer Perception Survey

As part of Hernon's ISO-9001 Registration, the Hernon Quality Management System must take into account our customer's perception of Hernon's performance. Is Hernon meeting your expectations? Let us know via our short customer satisfaction survey available online at http://hernonmfg.com/survey. The survey is just six short, multiple-choice questions. You may win a Hernon Handy Set Kit. Please see web site for complete contest rules.

Unsubscribe Information

To unsubscribe, please send an email to newsletter@hernonmfg.com with "UNSUBSCRIBE" in the subject line.